Myths are a part of everything around us. You will be astonished to know that the process of forging a knife is also not immune against a range of misconceptions. If you are feeling inquisitive, start reading ahead to know more.
Myth One: Iron does not make good weapons because it is too soft
A common misconception is that you cannot make sturdy Forged Rings or knives if it is not made from steel. Actually, the root behind this myth is that people believe that steel is an amalgamated form of carbon and iron. To be honest, it is not iron that contains steel, but this metal itself has varying proportions of carbon. Although greater percentage of carbon content accounts for the durability of steel, it has to be to a specific ration. If this ratio exceeds and a steel bar is filled up with carbon content then it will become brittle. Therefore, you can conclude that the above statement is a myth.
Myth Two: Railroad spikes make good weapons
Railroads are a popular material that is used by the blacksmiths for manufacturing weapons, specifically knives. However, it never means that this is the only material that contributes towards making sturdy and firm weapons. Rather, the scenario is just the opposite. If you analyze a set of railroad spikes and find out a tag that reads ‘high carbon,’ it will never means that you are going to make hard weapons out of it. Actually, what is considered as high carbon content in case of railroad spikes is interpreted as low carbon content for weapons by the blacksmiths. Hence, stop believing in this illogical statement.
Myth Three: Forging is the ultimate process contributes towards making sturdier knives
Forging is basically one of the three methods that are employed by the blacksmiths for manufacturing knives. In addition, you can get tailor made knives when you opt for this method of Pot Forgings, open forging or die-cut forging. However, there is no logic behind the statement that this is the only way of manufacturing strong knives. This is because this process that was in use decades back. Although it is used today, blacksmiths mostly use the stock removal metal for casting a steel bar into the shape of a knife.
Reference Post: https://oklahomaforge.wordpress.com/2015/12/10/myths-about-forging-you-should-not-rely-upon/
Myth One: Iron does not make good weapons because it is too soft
A common misconception is that you cannot make sturdy Forged Rings or knives if it is not made from steel. Actually, the root behind this myth is that people believe that steel is an amalgamated form of carbon and iron. To be honest, it is not iron that contains steel, but this metal itself has varying proportions of carbon. Although greater percentage of carbon content accounts for the durability of steel, it has to be to a specific ration. If this ratio exceeds and a steel bar is filled up with carbon content then it will become brittle. Therefore, you can conclude that the above statement is a myth.
Myth Two: Railroad spikes make good weapons
Railroads are a popular material that is used by the blacksmiths for manufacturing weapons, specifically knives. However, it never means that this is the only material that contributes towards making sturdy and firm weapons. Rather, the scenario is just the opposite. If you analyze a set of railroad spikes and find out a tag that reads ‘high carbon,’ it will never means that you are going to make hard weapons out of it. Actually, what is considered as high carbon content in case of railroad spikes is interpreted as low carbon content for weapons by the blacksmiths. Hence, stop believing in this illogical statement.
Myth Three: Forging is the ultimate process contributes towards making sturdier knives
Forging is basically one of the three methods that are employed by the blacksmiths for manufacturing knives. In addition, you can get tailor made knives when you opt for this method of Pot Forgings, open forging or die-cut forging. However, there is no logic behind the statement that this is the only way of manufacturing strong knives. This is because this process that was in use decades back. Although it is used today, blacksmiths mostly use the stock removal metal for casting a steel bar into the shape of a knife.
Reference Post: https://oklahomaforge.wordpress.com/2015/12/10/myths-about-forging-you-should-not-rely-upon/
Very nice post, impressive. its quite different from other posts. Thanks for sharingMachined components | Forging machine
ReplyDelete